EM500 Tibbo EM500 Programmable Ethernet Module
Description
EM500 Programmable Ethernet Module
The product with part number EM500 (EM500 Programmable Ethernet Module)
is from company Tibbo. Minimal order quantity is 1 pc, Origin Taiwan.
Products Status: Stock Brand Name: Tibbo Model Number: EM500 Place of Origin: Taiwan Completed connection software: Yes Built-in Web page for monitor & config: Yes Serial to Ethernet: Yes Metal plate for heat dispassion: Yes Wi-Fi Option: Yes Specifications 10/100BaseT Ethernet module 1 serial port 8 GPIO Completed connection software support Built-in Web page for monitor & config Programmable Ethernet Module The EM500 Ethernet module is a miniature stand-alone BASIC-programmable embedded module, designed to be used in combination with a standard LED/magnetics RJ45 jack. The combined footprint of the EM500 and a standard jack is only 28.5x18.5mm.The module's hardware mix, which includes 10/100BaseT Ethernet, a serial port, and 8 I/O lines, has been carefully tailored to address the basic needs of lightweight network-enabled control devices.Compact dimensions, space-saving "vertical slice" mechanical design, low power consumption, and innovative control lines make the module an excellent fit for miniature, cost-sensitive designs.In the near future, the EM500 will also support Wi-Fi communications (using the add-on board), as well as external LCD, keypad, and flash disk (via an SPI flash IC). Specifications: Based on a second-generation ASIC (T2000).10/100BaseT auto-MDIX Ethernet port (no magnetics).One serial port (CMOS-level): Baudrates of up to 460800bps;None/even/odd/mark/space parity modes;7/8 bits/character modes;Full-duplex mode with optional flow control;Half-duplex mode with direction control;Encoding and decoding of Wiegand and clock/data streams.512KB flash memory for firmware and application.200 bytes of EEPROM space for data storage.8 general-purpose I/O lines (including 2 interrupt lines).Control lines for two external status LEDs.Additional control line for a dedicated Ethernet link LED.External reset source required.Power: 260mA @ 3.3V (100BaseT mode)."Vertical slice" construction; dimensions: 18.5x16.0x6.5mm.Firmware is upgradeable through the serial port or network (including "" firmware uploads through the network). Module Comparison Chart:
Following Parts
Random Products
(keyword EM500 Tibbo EM500 Programmable Ethernet Module)
